Steel bar upsetting head processing1. Working principle of electric upsettingSteel bar upsetting can be divided into cold heading and hot heading. At present, electric upsetting method is commonly used in construction site. Electric upsetting is generally carried out on the lever driven butt welding

Precautions for the installation of steel cage welder:1. Safety protection measures should be taken during the whole installation process, and irrelevant personnel are strictly prohibited from approaching the site;2. Before installation, be familiar with the installation steps, predict the security

1. Before starting the CNC steel cage welder every day, check the machine. The main contents of the check are as follows:1) Check whether the control power switch is in the off state;2) Whether all lines are connected in normal state;3) Carefully check whether there is oil leakage;4) Whether the bol

Steel cage welding machine is a kind of equipment which is controlled by PLC or SCM to process and produce steel cage. The appearance of CNC steel cage welder has ended the history of steel cage binding by hand, and improved the efficiency for the manufacture of Bridges and high-speed railways. Work

① After the operation is completed, the finished products should be stacked, the site should be cleaned, and the power supply should be cut off.②The mechanical transmission part should have a protective cover, and the electrical part should be grounded or connected to zero. ③ All kinds of machinery

▶ Maintenance of steel cage welder1. At the end of every day's work, power should be cut off. It is recommended to check and clean the steel cage welder.2. It is strictly prohibited to wash and blow ash on electrical equipment with water or compressed air. Water is strictly prohibited in the electri